Product ID:PETROTECT IX,MIL-C-16173,GRADE 1
MSDS Date:01/01/1985
FSC:8030
NIIN:00-244-1299
MSDS Number: BDNBV

Cage: PENRE

Telephone: 800-245-3952

Cage: 86459

NAPHTA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: DE3030000

Fraction By Weight: 37%

OSHA PEL 100 PPM

Effects of Overexposure:EYE: BURN/IRRIT. SKIN: IRRIT. VAPORS:
IRRIT,DROWSINESS,PNEUMONIA,COMA. INGESTION: IRRIT GI TRACT

First Aid:EYE: FLUSH WITH WATER 15 MIN,CALL PHYSICIAN. SKIN: WASH WITH
SOAP & WATER,REMOVE CONTAMINATED CLOTHING. INHALATION: REMOVE TO
FRESH AIR,GIVE ARTIF RESP IF NEEDED,CALL MD. INGESTION: DO NOT
INDUCE VOMI TING,CALL A PHYSICIAN.

Flash Point:100F/37C (PMCC)
Extinguishing Media:FOAM,DRY CHEMICAL,CARBON DIOXIDE
Fire Fighting Procedures:TREAT AS AN OIL FIRE,WATER ONLY TO COOL
EXPOSED CONTAINERS
Unusual Fire/Explosion Hazard:DENSE SMOKE MAY BE GENERATED WHEN
BURNING,SOLVENT CAN CREATE MODERATE FIRE OR EXPLOSION HAZARD

Spill Release Procedures:REMOVE FROM IGNITION SOURCES,SCRAPE MATERIAL
INTO WASTE CONTAINERS,OR ABSORB WITH DRY SAND OR OIL ABSORBENTS.
CLEAN SPILL AREA WITH DETERGENT SOLUTIONS OR SAFETY SOLVENTS.
PROVIDE ADEQUATE VENTILATION DURING CLEAN UP.

Handling and Storage Precautions:STORE IN SEALED CONTAINERS AWAY FROM
HEAT,OPEN FLAME,AND OXIDIZING MATERIALS.
Other Precautions:FIRE EXTINGUISHERS MUST BE KEPT READLY AVAILABLE &
PERSONNEL TRAINED IN PROPER USE.

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN
Ventilation:LOCAL/GENERAL
Protective Gloves:RUBBER,SYNTHETI
Eye Protection:SPLASH PROOF GOGGLES
Other Protective Equipment:RUBBER PROTECTIVE CLOTHING,BOOTS,APRONS
Supplemental Safety and Health
50% DISTILLATION TEMPERATURE IS BETWEEN 300-360F. PKG: 5 GAL PAIL.
SOLVENT CONTAINS NO DETECTABLE BENZENE (IE: <3 PPM)

HCC:F4
Boiling Pt:B.P. Text:300F/148C
Vapor Density:4.3
Spec Gravity:0.912
Evaporation Rate & Reference:<1 (EE)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK LIQUID ASPHALT,HYDROCARBON SOLVENT ODOR
Percent Volatiles by Volume:37

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:CO,CO*2,SMOKE,SO*X

Waste Disposal Methods:WASTE MATERIALS SHOULD BE DUMPED OR BURIED IN AN
APPROVED INDUSTRIAL WASTE LAND FILL. LARGE QUANTITIES MAY BE
DISPOSED OF BY INCINERATION IN A SUITABLE COMBUSTION CHAMBER.
DISPOSAL MUST COMPLY WITH AL L FEDERAL,STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.